Email Us @ Rivets In Stock.com

 

Closed-End Blind Rivets Dome Head Specifications

 

Dimensions of Dome Head Style Break Mandrel Closed End Blind Rivets (Table 1)

Rivet Series NO.	Nom Rivet Size	D		H		E	R	W	P	F	L
		Body Dia		Style 1 Regular Head			Radius of Fillet	Mandrel Dia	Mandrel Protrusion	Blind Side Protrusion	Rivet Body Length
				Head Dia		Head Height		All Materials
		Max	Min	Max	Min	.Max		Max	Min	Max	Max
4	1/8 0.1250	0.128	0.122	0.252	0.224	0.050	0.025	0.074	1.00	Equal to "L" Rivet Body Length	See Table 2
5	5/32 0.1562	0.159	0.153	0.328	0.296	0.065	0.025	0.092	1.06
6	3/16 0.1875	0.191	0.183	0.394	0.356	0.080	0.025	0.110	1.06
8	1/4 0.2500	0.255	0.246	0.525	0.475	0.100	0.025	0.146	1.06
See Notes							3			4

 

Notes:   All Dimensions are in inches. For application data, see table 2 The Junction of head shank shall have a fillet with a max radius as shown. The blind side protrusion (F) equals the max length of rivet body (L) as given in Table 2 for the applicable grip. Minimum blind side clearance may be calculated by subtracting the actual grip (G) (i.e. the total thickness of material to be joined) from the blind side protrusion (F). (Example: To join two plates each .100 in. thick with a 5/32 in. rivet, a No. 54 rivet would be used. Minimum blind side clearance necessary to permit proper rivet setting would be L-G, which is .500 - .200 and equals .300 in.)

 

 

Application Data for Dome Head Style Break Mandrel (Table 2)

Rivet Series NO.	Nom Rivet Size	Recommended Drill Size	Recommended Hole Size		Rivet No.	Grip Range	Rivet Body Length
							Max
			Max	Min
4	1/8 0.1250	#30	0.133	0.129	41 42 43	.020-.062 .063-.125 .126-.187	0.297 0.360 0.422
					44 45 46 48	.188-.250 .251-.312 .313-.375 .376-.500	0.485 0.547 0.610 0.735
5	5/32 0.1562	#20	0.164	0.160	52 53 54	.020-.125 .126-.187 .188-.250	0.375 0.437 0.500
					55 56 58	.251-.312 .313-.375 .376-.500	0.562 0.625 0.750
6	3/16 0.1875	#11	0.196	0.192	62 63 64	.020-.125 .126-.187 .188-.250	0.406 0.468 0.531
					66 68 610 612	.251-.375 .376-.500 .501-.625 .626-.750	0.656 0.781 0.906 1.026
8	1/4 0.2500	F	0.261	0.257	82 84 86	.020-.125 .126-.250 .251-.375	0.445 0.570 0.695
					88 810	.376-.500 .501-.625	0.820 0.945
					812 814 816	.626-.750 .751-.875 .876-1.00	1.070 1.195 1.320
See Notes		2

 

Notes:   All Dimensions are in inches. Recommended drill sizes are those which normally produce holes within the specified hole size limits. Dome Head Closed-End Blind Rivets   PR--AAPH (Aluminum Rivet / Aluminum Mandrel) PR--ASPH (Aluminum Rivet / Steel Mandrel) PR--FFPH (Stainless Steel Rivet / Stainless Steel Mandrel) Example: PR64FFPH

 

 

 

 

Closed-End Blind Rivets Countersunk Head Specifications

 

Dimensions of 120 Deg. Countersunk Head Style Break Mandrel Closed End Blind Rivets (Table 1)

Rivet Series NO.	Nom Rivet Size	D		H		E	R	W	P	F	L
		Body Dia		Style 1 Regular Head			Radius of Fillet	Mandrel Dia	Mandrel Protrusion	Blind Side Protrusion	Rivet Body Length
				Head Dia		Head Height		All Materials
		Max	Min	Max	Min	.Max		Max	Min	Max	Max
4	1/8 0.1250	0.128	0.122	0.252	0.221	0.0420	0.025	0.074	1.00	Equal to "L" Rivet Body Length	See Table 2
5	5/32 0.1562	0.159	0.153	0.328	0.296	0.051	0.025	0.092	1.06
6	3/16 0.1875	0.191	0.183	0.394	0.356	0.060	0.025	0.110	1.06
8	1/4 0.2500	0.255	0.246	0.525	0.475	0.080	0.025	0.146	1.06
See Notes				3		4				5

 

Notes:   All Dimensions are in inches. For application data, see table 2 Maximum head diameter is called on nominal rivet diameter and nominal head angle extended to sharp corner. Minimum head diameter is absolute Head Height is given for reference purposes only. Variations in this dimension are controlled by the diameters (H) and (D) and the included angle of the head. The blind side protrusion (F) equals the max length of rivet body (L) as given in Table 2 for the applicable grip. Minimum blind side clearance may be calculated by subtracting the actual grip (G) (i.e. the total thickness of material to be joined) from the blind side protrusion (F). (Example: To join two plates each .100 in. thick with a 5/32 in. rivet, a No. 54 rivet would be used. Minimum blind side clearance necessary to permit proper rivet setting would be L-G, which is .550 - .200 and equals .350 in.)

 

 

 

 

Application Data for Countersunk Head Style Break Mandrel (Table 2)

Rivet Series NO.	Nom Rivet Size	Recommended Drill Size	Recommended Hole Size		Rivet No.	Grip Range	Rivet Body Length
							Max
			Max	Min
4	1/8 0.1250	#30	0.133	0.129	41 42 43	.031-.062 .063-.125 .126-.187	0.332 0.395 0.457
					44 45 46 48	.188-.250 .251-.312 .313-.375 .376-.500	0.520 0.582 0.645 0.770
5	5/32 0.1562	#20	0.164	0.160	52 53 54	.063-.125 .126-.187 .188-.250	0.425 0.487 0.550
					55 56 58	.251-.312 .313-.375 .376-.500	0.612 0.675 0.800
6	3/16 0.1875	#11	0.196	0.192	62 63 64	.063-.125 .126-.187 .188-.250	0.471 0.538 0.601
					66 68 610 612	.251-.375 .376-.500 .501-.625 .626-.750	0.736 0.851 1.026 1.101
8	1/4 0.2500	F	0.261	0.257	82 84 86	.020-.125 .126-.250 .251-.375	0.525 0.650 0.775
					88 810	.376-.500 .501-.625	0.900 1.025
					812 814 816	.626-.750 .751-.875 .876-1.00	1.150 1.275 1.400
See Notes		2

 

Notes:   All Dimensions are in inches. Recommended drill sizes are those which normally produce holes within the specified hole size limits. Countersunk Head Closed-End Blind Rivets   PR--AACH (Aluminum Rivet / Aluminum Mandrel) PR--ASCH (Aluminum Rivet / Steel Mandrel) PR--FFCH (Stainless Steel Rivet / Stainless Steel Mandrel) Example: PR64FFCH

 

Visit the Family of Jay-Cee Sales & Rivet Websites

• www.blindrivet.net
• www.semitubularrivets.com
• rivetnuttools.com
• www.rivetnuts.com
• www.rivetsinstock.com

Home | Rivets | Rivet Tools | Quality Standard & Data | Contact Us
jay-cee sales and rivet Inc. 

Phone: 800-521-6777    Fax: 248-478-6416
© Copyright Jay-Cee Sales & Rivet Inc.

Developed by Propel Pages - Michigan Industrial Web Design